|
| Selective Soldering Machines |
|
MySelective
6745
 Is it Time for a Change?
Are you still soldering connectors and leaded components in
pallets on wave soldering machines? Are you spending too much
money on custom pallets, waste, flux, and dross? Are you having
trouble doing pin-in-paste in your reflow system and losing
costly product to thermal damage? Are you still hand soldering
and suffering from high labor costs and inconsistent quality?
Individual solder joint optimization
mySelective 6745 brings a new dimension to selective soldering
technology. It’s what you need today to meet the
growing challenges of high yields, cost-efficient production,
and process control. Although wave and reflow soldering use
the same settings for all solder connections, mySelective 6745
offers the ability to solder each joint under its optimum
process parameters. In-line fluxing and preheating reduce
robotic soldering cycles. The machine’s architecture
allows it to assume can optimized configuration to accommodate
the appropriate process parameter settings for each individual
application.
High mix production
mySelective.com
delivers production in a high-mix environment. The SelectWave
soldering technology, plus on-the-fly reconfigurability, give
mySelective unmatched process flexibility. Plus, in-line
fluxing and preheating reduce robotic soldering cycle times
for faster, more efficient process cycles. mySelective’s
Dropjet Fluxing system and rapid-responding Preheaters enhance
speed and efficiency in this robust, adaptable system.
Features:
- High Mix/Low Volume
- 100% Configurable
- Accurate Drop Jet Flux
- Powerful Preheat
- Universal Dedicated Securegrip
- Flexible Select Wave
- Easy Programmability
- High Repeatability
- Offline Programmin
MySelective
6747
Drop-In Soldering Solution
There’s a one-stop, simple, ‘drop in’
solution to all of these problems and more - mySelective 6747.
It’s designed to do what other soldering methods can’t.
It’s ideal for soldering tall bottom side
components, delivers great results as an alternative for
pin-in-paste, and it’s perfect for safeguarding
temperature-sensitive components. It’s faster and
more consistent than hand soldering. Selective soldering is
controllable, cost-efficient, and designed for today’s
lead-free and board topographies. With mySelective 6747, there’s
no longer any need to modify, tweak, or attempt to make older
technologies or methods meet today’s soldering
challenges.
Major Cost Savings
mySelective 6747
delivers the significant costs saving that you’ve
always been looking for in your soldering process. There’s
no dross build-up needing removal and reprocessing; less
materials waste; you don’t need expensive,
customized pallets; labor costs drop dramatically – and
quality jumps – because you’re not hand
soldering anymore. Your soldering is simpler, more efficient,
more repeatable, and more profitable.
The Right Match for Your Manufacturing
Zero programming time makes mySelective 6747 the seamless ‘upgrade’
solution for your operators. There’s no
interruption, no steep learning curve. Plus, its high-speed
capability, combined with its efficient HOZ 02i tal transport
system, gives mySelective 6747 throughput comparable to wave
soldering, footprint for footprint.
Features:
- Low Mix/High Volume
- 100% Configurable
- Reliable Transport System
- Accurate Multipoint Fluxer
- Powerful Preheat
- High Speed Multiwave
- Universal Dedicated Lifting Unit
- Single point Teaching Off-Line
- Automatic Process Capability Reports
- Easy Programmability
MySelective
6748
Individual Solder Joint Optimization
mySelective 6748 brings a new dimension to selective soldering
technology. It’s what you need today to meet the
growing challenges of high yields, cost-efficient production,
and process control. Although wave and reflow soldering use
the same settings for all solder connections, mySelective 6748
offers the ability to solder each joint under its optimum
process parameters. The machine’s architecture
allows it to assume an optimized configuration to accommodate
the appropriate process parameter settings for each individual
application.
High Mix/High Volume
Production
mySelective 6748 delivers high-volume
production in a high-mix environment. Combined SelectWave and
MultiWave soldering technology, plus on –the-fly
reconfigurability, give mySelective 6748 unmatched process
flexibility. Plus, In-line fluxing and preheating reduce
robotic soldering cycle times for faster, more efficient
process cycles. mySelective 6748 MultiFlux system and
rapid-responding Preheaters enhance speed and efficiency in
this robust, adaptable system.
A New
Dimension: Web Integration
mySelective 6748 is
thinking outside the machine. Offering total Web integration
with the best advanced hardware and software controls,
mySelective 6748 offers a new dimension in selective soldering
production. It’s more than just the machine. The
machine and the web site are synchronous and fully integrated;
No more time lost in getting the latest information and
updates, since an entire web site is dedicated to mySelective
6748. Password-protected information is up to date and
available to customers anytime, anywhere.
Features:
- High Mix/High Volume
- 100% Configurable
- Reliable Transport System
- Repeatable Multiflux
- Powerful Preheat
- Flexible Selectwave
- High Speed Multiwave
- Single point Teaching Off-Line
- Universal Dedicated Securegrip
- Dynamic Calibration
|
