top of page

PRODUCT DESCRIPTION

The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint.

FEATURES

  • SmartHeat® temperature control

  • Ergonomic, lightweight handle

  • Rugged cast aluminum housing

  • Added plating thickness to tips

  • Low cost, quick-change heater coil

PRODUCT COMPRISES OF

 PS-PW900                                                                                    Power Supply

 PS-HC3                                                                                         Hand-piece with long cord with Coil Assembly

 SFV-CH15A                                                                                  Chisel soldering tip 1.5mm (.06″)

 WS2-NS                                                                                        Workstand

 AC-CP2                                                                                         Tip removal pad

Power Supply

Output Frequency                                                                      450 KHz

Output Power                                                                              60 Watts max. at 22°C ambient temperature

Power Consumption                                                                  90 Watts max.

Input Line Frequency                                                                 50/60 Hz

Input Line Voltage                                                                      100 – 240 VAC

Maximum Enclosure Temperature                                          65°C

Ambient Operating Temperature                                            10 – 40°C

Power Cord (3-wire)                                                                    274 cm 18/3 SJT

Dimensions W x D x H                                                                80 x 160 x 115 mm (3.1″ x 6.3″ x 4.5″)
 

Soldering Handle and Coil Assembly

Tip to grip                                                                                      58 mm (2.28″)

Grip diameter                                                                               13 mm (0.51″)

Overall length (with tip)                                                              230 mm (9.06″) with standard tips Connector  3-pin power connector

Handle Cord Assembly Length                                                  122 cm – burn proof, ESD safe

Idle Temperature Repeatability                                                 ± 1.1°C in still air

Tip-to-Ground Resistance                                                           < 2 ohms

Tip-to-Ground Potential                                                              < 2 mV

Tip shaft diameter                                                                        8.0 mm (0.31″)

Tip length                                                                                       82 mm (3.23″) to 93 mm (3.66″) (typical)

Workstand W x D x H                                                                   105 x 175 x 90 mm (4.1″ x 6.9″ x 3.5″)

MFR-1110

MFR 1110

PRODUCT DESCRIPTION

The MFR-1110 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1110 comes with one cartridge soldering hand-piece. The cartridge hand-piece uses small diameter cartridges for easy access and includes a full range of cartridges, including SMD rework.

FEATURES AND BENEFITS

  • SmartHeat® Technology provides exceptional power for high thermal demand applications.

  • Four hand-pieces available for increased application solutions for soldering and rework on one system

  • Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility

  • Hand-pieces are ergonomic for operator safety and comfort

  • Small Bench Top foot print

  • Can be combined and locked with its brother the MFR-2200 dual output series for increased application solutions for soldering and rework.

TECHNICAL SPECIFICATIONS

 PRODUCT COMPRISES OF

 MFR-PS1100                                                                               MFR Single Output Power Supply

 MFR-H1-SC2                                                                               New Style MFR Soldering Cartridge Hand-piece 

 WS1                                                                                              Soldering Workstand compatible with MFR-H1- SC Hand-piece

Ambient Operating Temperature:                                           10 – 40°C (50°F – 104°F)

Maximum Enclosure Temperature:                                         55°C (131°F)

Input Line Voltage:                                                                     100 – 240 VAC

Input Line Frequency:                                                                50/60 Hz grounded circuit

Power Consumption:                                                                 65 Watts maximum

Output Power:                                                                             60 Watts maximum

Output Frequency:                                                                     450 KHz

Power Cord:                                                                                 (3-wire) 183 cm 18/3 SJT

Dimensions (approx.) W x D x H:                                             90mm (3.5”) x 200mm (8”) x 152.5mm (6”)

Weight:                                                                                         2.3kg (5.05 lbs)

Surface Resistivity:                                                                     105-109 Ohms

Certification / Marking:                                                              cTUVus, CE

 Hand-piece Cable Length:                                                        L=122cm (48′), burn resistant, ESD safe

​

Handle and Workstand

Tip-to-Ground Potential:                                                           < 2 mV RMS

Tip-to-Ground Resistance:                                                        < 2 ohms

Idle Temperature Repeatability:                                              +/- 1.1°C (2°F) in still air

Handle Cord Assembly Length:                                               122cm – burn proof, ESD safe
                                                                                                      Connector 8-pin circular DIN

Workstand W x D x H:                                                               100mm x 200mm x 100mm (4″ x 8″ x 4″)

Workstand Weight:                                                                    0.69 kg (1.51 lbs)

​

MFR-1120

MFR 1120

PRODUCT DESCRIPTION

The MFR-1120 Single Output Series is a highly versatile unit that is available with either a soldering/blade tips, soldering/rework cartridges or tweezer hand-piece. The MFR-1120 includes a solder/blade tip hand-piece (MFR-H2-ST2) and a workstand. See below for the list of tips available for the MFR-1120. Other accessories are also available.

FEATURES AND BENEFITS

  • SmartHeat® Technology includes a microprocessor controlled heating system that operates at lower temperatures and eliminates calibration time. .

  • MFR-1100 units are designed for use with 5 different hand-pieces, including a desoldering option.

  • Each hand-piece has a large variety of cartridges and Tips for maximum flexibility

  • Ergonomic hand-piece helps ensure operator safety and comfort

  • Small bench top footprint

  • Can be combined with the MFR-2200 Dual Output Series for additional application options.

 

PRODUCT COMPRISES OF
 

 MFR-PS1100                                                                                              MFR Single Output Power Supply

 MFR-H2-ST2                                                                                              Tip Soldering Hand-piece for the MFR Series

 WS1                                                                                                            Soldering Workstand, Compatible with MFR-H2-ST2 Hand-piece

 

TECHNICAL SPECIFICATIONS

Power Supply:

Ambient Operating Temperature                                                          10 – 40°C (50°F – 104°F)

Maximum Enclosure Temperature                                                        55°C (131°F)

Input Line Voltage                                                                                    100 – 240 VAC

Input Line Frequency                                                                               50/60 Hz grounded circuit

Power Consumption                                                                                65 Watts maximum

Output Power                                                                                            60 Watts maximum

Output Frequency                                                                                    450 KHz

Power Cord                                                                                                (3-wire) 183 cm 18/3 SJT

Dimensions (approx.) W x D x H                                                             90mm (3.5”) x 200mm (8”) x 152.5mm (6”)

Weight                                                                                                         2.3kg (5.05 lbs)

Surface Resistivity                                                                                     105-109 Ohms

Certification / Marking                                                                              cTUVus, CE

Hand-piece Cable Length                                                                        L=122cm (48″), burn resistant, ESD safe

 Handle and Workstand:

Tip-to-Ground Potential                                                                           < 2 mV RMS

Tip-to-Ground Resistance                                                                        < 2 ohms

Idle Temperature Repeatability                                                               +/- 1.1°C (2°F) in still air

Handle Cord Assembly Length                                                                122cm – burn proof, ESD safe
Connector 8-pin circular DIN

Workstand W x D x H                                                                                100mm x 200mm x 100mm (4″ x 8″ x 4″)

Workstand Weight                                                                                     0.69 kg (1.51 lbs)

MFR-1140

MFR 1140

PRODUCT DESCRIPTION

The MFR-1140 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1140 comes with a precision Tweezer hand-piece to rework SMD components with fine dimension to large blade geometries.

FEATURES AND BENEFITS

  • SmartHeat® Technology provides exceptional power for high thermal demand applications.

  • Four hand-pieces available for increased application solutions for soldering and rework on one system

  • Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility

  • Hand-pieces are ergonomic for operator safety and comfort

  • Small Bench Top foot print

  • Can be combined and locked with its brother the MFR-2200 dual output series for increased application solutions for soldering and rework.

PRODUCT COMPRISES OF
 

 MFR-PS1100                                                                                                MFR Single Output Power Supply

 MFR-H4-TW                                                                                                 Tweezer Hand-piece for the MFR Series

 MFR-WSPT                                                                                                   Soldering Workstand compatible with MFR-H4-TW Hand-piece

TECHNICAL SPECIFICATIONS

Power Supply:


 

Ambient Operating Temperature:                                             10 – 40°C (50°F – 104°F)

Maximum Enclosure Temperature:                                           55°C (131°F)

Input Line Voltage:                                                                       100 – 240 VAC

Input Line Frequency:                                                                  50/60 Hz grounded circuit

Power Consumption:                                                                   65 Watts maximum

Output Power:                                                                               60 Watts maximum

Output Frequency:                                                                       450 KHz

Power Cord:                                                                                   (3-wire) 183 cm 18/3 SJT

Dimensions (approx.) W x D x H:                                               90mm (3.5”) x 200mm (8”) x 152.5mm (6”)

Weight:                                                                                            2.3kg (5.05 lbs)

Surface Resistivity:                                                                       105-109 Ohms

Certification / Marking:                                                                cTUVus, CE

Hand-piece Cable Length:                                                           L=122cm (48″), burn resistant, ESD safe

 Handle and Workstand:

Tip-to-Ground Potential:                                                              < 2 mV RMS

Tip-to-Ground Resistance:                                                           < 2 ohms

Idle Temperature Repeatability:                                                 +/- 1.1°C (2°F) in still air

Handle Cord Assembly Length:                                                  122cm – burn proof, ESD safe
Connector 8-pin circular DIN

Workstand W x D x H:                                                                   100mm x 200mm x 100mm (4″ x 8″ x 4″)

Workstand Weight:                                                                        0.69 kg (1.51 lbs)

MFR-1150

MFR 1150

PRODUCT DESCRIPTION

The MFR-1150 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge, tweezers or desoldering hand-piece. The MFR-1150 comes with one desoldering hand-piece and a Venturi workstand.

FEATURES AND BENEFITS

  • Venturi workstand

  • Provides shop air option for all MFR series

  • Compatible for use with all MFR systems

  • Uses existing DxP desolder cartridges and replaceable coil assembly (MFR-HDCA)

  • Small Bench Top foot print

  • SmartHeat® Technology provides exceptional power for high thermal demand applications​

PRODUCT COMPRISES OF
 

 MFR-PS1100                                                                     MFR Single Output Power Supply

 MFR-H5-DS                                                                       Desoldering Hand-piece for the MFR Series

 MFR-WSDSX                                                                     Desoldering Workstand with venturi compatible with MFR-H5- DS Hand-piece

 MFR-FTKIT                                                                        Fittings and air hose kit

 AC-TC                                                                                 Desoldering Tip Cleaner

TECHNICAL SPECIFICATIONS

Power Supply:

​

Input Line Voltage:                                                             100 – 240 VAC

Input Line Frequency:                                                        50/60 HZ

Power Consumption:                                                         65 Watts maximum

Output Power:                                                                     60 Watts maximum

Output Frequency:                                                              450 KHz

Dimensions (approx.) W x D x H:                                      90mm (3.5″) x 200mm (8″) x 152.5mm (6″)

Weight:                                                                                  2.3kg (5.05 lbs)

Idle Tip Temperature Stability:                                          +/- 1.1°C (2°F) in still air

Ambient Operating Temperature:                                    10 – 40°C (50°F – 104°F)

Maximum Enclosure Temperature:                                  55°C (131°F)

Tip to ground Potential:                                                      <2 Ohms

Surface resistivity:                                                                105 – 109 Ohm

Approvals cTUVus                                                                 CE

Hand-piece Cable Length:                                                   L=122cm (48″), burn resistant, ESD safe

MFR-H5-DS Desolder Hand-piece:

Power Cord (3-wire):                                                            183 cm 18/3 SJT

Solder Hand-piece cable length:                                        152 cm (60″), burn proof, ESD safe

Hand piece connector:                                                         8 pin power connector

MFR-WSDSX Workstand:

Input Voltage:                                                                        24V

Input Power:                                                                          15W

Workstand dimensions:                                                       100mm x 200mm x 140mm (4″ x 8″ x 5.5″)

Noise Level:                                                                            < 55 dB

Recommended Air Pressure:                                              550kPa (80 PSI) – Shop air only

Vacuum suction force:                                                          0.85 bar (25″ Hg)

MFR-1351

MFR 1351

PRODUCT DESCRIPTION

The MFR-1350 features a soldering hand-piece and a desoldering gun. The power supply has an internal pump providing 0.7 bar of vacuum suction force combined with Smartheat® technology that makes soldering, rework and through-hole desoldering easy and safe.

FEATURES AND BENEFITS

  • Self-contained powerful pump

  • 2 in 1 ergonomic and flexible hand-piece: pencil or pistol

  • Collection chamber with larger capacity

  • Smart collection chamber for quick and easy change

  • Dual switchable output

  • Powered by Smartheat® Technology​


PRODUCT COMPRISES OF
 

MFR-PS1300                                                                           Switched Dual Output Power Supply with Internal Pump

MFR-H5-DS                                                                             Desolder Hand-piece, with selectable grip, and cord

MFR-H1-SC2                                                                           New Style Solder Cartridge Hand-piece, with cord

MFR-WSDSU                                                                           Universal Workstand for Desolder Hand-piece

WS1                                                                                          Universal Workstand for Solder Hand-piece

TECHNICAL SPECIFICATIONS

Input Line Voltage:                                                             100-240 VAC

Input Line Frequency:                                                        50/60Hz

Power Consumption:                                                         110 Watts max. (Power Supply MFR-PS1300)

Output Power:                                                                     60 Watts Max (RF SmartHeat® Power)

Output Frequency:                                                              450 KHz

Idle Tip temperature stability:                                           +/- 1.1°C (34°F) in still air

Ambient Operating Temperature:                                    10 – 40°C (50 – 104°F)

Maximum Enclosure Temperature:                                  55°C (131°F)

Noise level:                                                                           < 55 dB

Vacuum suction force:                                                        0.7 bar (21in Hg at Vacuum pump at sea level)

Power Cord (3-wire:                                                            183cm (72″)

Desolder Hand-piece cable length:                                   L=122 cm (48″), burn proof, ESD safe

Hand piece connector:                                                        8 pin power connector

Tip to ground Potential:                                                      <2mV

Tip to ground resistance:                                                    <2 Ohms

Surface Resistivity:                                                               105 – 109 Ohms

Approvals:                                                                              cTUVus, CE

Dimensions (approx.) W x D x H:                                       170mm x 200mm x 152.5mm (7″ x 8″ x 6″)

Workstand dimensions:                                                      100mm x 200mm x 100mm (4″ x 8″ x 4″)

MFR-2240

MFR 2240

PRODUCT DESCRIPTION

Like the MFR-1100 Series, the MFR-2240 offers the same choice of multiple hand-pieces with two ports. Flexibility can be increased by locking both systems together. The MFR-2240 includes a Tweezer Hand-piece for the rework of SMD components with fine dimension to large blade geometries.

FEATURES AND BENEFITS

  • SmartHeat® Technology provides exceptional power for high thermal demand applications.

  • Single or Dual simultaneous outputs allow for single or dual hand-piece use.

  • Four hand-pieces available for increased application solutions for soldering and rework on one system.

  • Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility.

  • Hand-pieces are ergonomic for operator safety and comfort.​


PRODUCT COMPRISES OF
 

MFR-H4-TW                                                                      Hand-piece, Tweezers Cartridge

MFR-PS2200                                                                     Power Supply, Dual Simultaneous Output

MFR-WSPT                                                                        Workstand for Tweezers Hand-piece

TECHNICAL SPECIFICATIONS

Input Line Voltage / Frequency:                                   100- 240 VAC , 50/60 Hz grounded circuit

Power Consumption:                                                     130 Watts maximum

Output Power Maximum:                                              60 Watts max. at 22°C per output (two outputs)

Idle Temperature Stability:                                            ± 1.1°C (2°F)

Ambient Operating Temperature:                                10- 40°C (50°F – 104°F)

Maximum Enclosure Temperature:                              55°C (131°F)

Power Cord 3-Wire:                                                          183cm (18/3″) SJT (S = 600 Volt Service Cord, J = JuniorService – 300 Volt, T =                                                                                                Thermoplastic)

Hand-piece Cable Length:                                               L=122cm (48″), burn resistant, ESD safe

Hand-piece Connector:                                                   8-pin cicular DIN

Tip-to-Ground Potential:                                                 < 2mV

Tip-to-Ground Resistance:                                              < 2 ohms

Certification / Marking:                                                   cTUVus, CE

Power Supply Dimensions w x d x h:                            170mm x 200mm x 152.5mm (7″ x 8″ x 6″)

Workstand Dimensions w x d x h:                                 100 mm x 200 mm x 100 mm (4″ x 8″ x 4″)

Surface Resistivity                                                            105-109 Ohms

MFR-2241

MFR 2241

PRODUCT DESCRIPTION

Like the MFR-1100 Series, the MFR-2240 offers the same choice of multiple hand-pieces with two ports. Flexibility can be increased by locking both systems together. The MFR-2240 includes a Tweezer Hand-piece for the rework of SMD components with fine dimension to large blade geometries.

FEATURES AND BENEFITS

  • SmartHeat® Technology provides exceptional power for high thermal demand applications.

  • Single or Dual simultaneous outputs allow for single or dual hand-piece use.

  • Four hand-pieces available for increased application solutions for soldering and rework on one system.

  • Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility.

  • Hand-pieces are ergonomic for operator safety and comfort.​

PRODUCT COMPRISES OF
 

MFR-H4-TW                                                                      Hand-piece, Tweezers Cartridge

MFR-PS2200                                                                     Power Supply, Dual Simultaneous Output

MFR-WSPT                                                                        Workstand for Tweezers Hand-piece

TECHNICAL SPECIFICATIONS

Input Line Voltage / Frequency:                                   100- 240 VAC , 50/60 Hz grounded circuit

Power Consumption:                                                     130 Watts maximum

Output Power Maximum:                                              60 Watts max. at 22°C per output (two outputs)

Idle Temperature Stability:                                            ± 1.1°C (2°F)

Ambient Operating Temperature:                                10- 40°C (50°F – 104°F)

Maximum Enclosure Temperature:                              55°C (131°F)

Power Cord 3-Wire:                                                          183cm (18/3″) SJT (S = 600 Volt Service Cord, J = JuniorService – 300 Volt, T =                                                                                                Thermoplastic)

Hand-piece Cable Length:                                               L=122cm (48″), burn resistant, ESD safe

Hand-piece Connector:                                                   8-pin cicular DIN

Tip-to-Ground Potential:                                                 < 2mV

Tip-to-Ground Resistance:                                              < 2 ohms

Certification / Marking:                                                   cTUVus, CE

Power Supply Dimensions w x d x h:                            170mm x 200mm x 152.5mm (7″ x 8″ x 6″)

Workstand Dimensions w x d x h:                                 100 mm x 200 mm x 100 mm (4″ x 8″ x 4″)

Surface Resistivity                                                            105-109 Ohms

MFR-5210

MFR 5210

PRODUCT DESCRIPTION

New Dual Port Simultaneous Soldering and Rework System highly effective for soldering applications including: lead-free, high mass components or boards, thermally sensitive components requiring low operating temperature, high volume production soldering and touch-up soldering operations. In addition, the MX-5210 can be used for conduction rework of SMDs when using SMTC Series soldering cartridges simultaneously.

FEATURES AND BENEFITS

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

  • Configured with the Metcal Advanced Soldering and Rework Hand-piece.

  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.

  • Improved ergonomics with lightweight hand-pieces.

  • Greater process control with SmartHeat® Technology.

  • ESD safe with incoming AC ground monitoring circuitry.

  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.

  • Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.
    ​

 

PRODUCT COMPRISES OF
 

MX-PS5200                                              Power supply, 100 to 240 VAC input, dual switch port with LCD Display

MX-H1-AV                                                 Metcal Advanced™ Hand-piece, Soldering and Rework with one cartridge removal pad

MX-W1AV                                                 Workstand for Metcal Advanced™ Hand-piece, Soldering and Rework with one sponge and                                                                      one brass pad

NOTE: No tip/cartridge included

 

TECHNICAL SPECIFICATIONS

Ambient Operating Temperature:                             10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:                           55°C (131°F)

Input Line Voltage:                                                       100- 240 VAC, grounded circuit

Input Line Frequency:                                                  50/60 Hz

Power Consumption:                                                   125 Watts

Output Power Maximum:                                            80 Watts max. Per channel at 22°C (when operated with two hand-pieces                                                                                                     dynamically, the 80 watts output power is is shared based on demand)

Output Frequency:                                                       13.56 MHzC

Power Cord 3-Wire:                                                      183cm (18/3") SJT

Dimensions w x d x h:                                                  12.1cm x 13.0cm x 23.5cm 
                                                                                         (4.8" x 5.1" x 9.3")

Certification / Marking:                                                 cTUVus, CE

Tip-to-Ground Potential:                                             < 2mV

Tip-to-Ground Resistance:                                          < 2 ohms

Idle Temperature Stability:                                          ± 1.1°C (2°F) in still air

Hand-piece Cable Length:                                            L=178cm (70"), burn resistant, ESD safe

Hand-piece Connector:                                                 F connector

Workstand Dimensions w x dx h:                                8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:                                        7.4 lbs (3.35 kg)

Weight of the * workstand:                                          1.05 lbs (.476 kg)

MFR-5211

MFR 5211

PRODUCT DESCRIPTION

New Dual Port Simultaneous Soldering and Rework System highly effective for soldering applications including: lead-free, high mass components or boards, thermally sensitive components requiring low operating temperature, high volume production soldering and touch-up soldering operations. In addition, the MX-5211 can be used for conduction rework of SMDs when using SMTC Series soldering cartridges simultaneously.

FEATURES AND BENEFITS

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

  • Configured with two Metcal Advanced Soldering and Rework Hand-pieces.

  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.

  • Improved ergonomics with lightweight hand-pieces.

  • Greater process control with SmartHeat® Technology.

  • ESD safe with incoming AC ground monitoring circuitry.

  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.

  • Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.

​​
 

PRODUCT COMPRISES OF
 

MX-PS5200                                              Power supply, 100 to 240 VAC input, dual switch port with LCD Display

MX-H1-AV                                                 Two Metcal Advanced™ Hand-piece, Soldering and Rework with one cartridge removal pad

MX-W1AV                                                 Two Workstand for Metcal Advanced™ Hand-piece, Soldering and Rework with one sponge                                                                    and one brass pad

NOTE: No tip/cartridge included

TECHNICAL SPECIFICATIONS

Ambient Operating Temperature:                             10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:                           55°C (131°F)

Input Line Voltage:                                                       100- 240 VAC, grounded circuit

Input Line Frequency:                                                  50/60 Hz

Power Consumption:                                                   125 Watts

Output Power Maximum:                                            80 Watts max. Per channel at 22°C (when operated with two hand-pieces                                                                                                     dynamically, the 80 watts output power is is shared based on demand)

Output Frequency:                                                       13.56 MHzC

Power Cord 3-Wire:                                                      183cm (18/3") SJT

Dimensions w x d x h:                                                  12.1cm x 13.0cm x 23.5cm 
                                                                                         (4.8" x 5.1" x 9.3")

Certification / Marking:                                                 cTUVus, CE

Tip-to-Ground Potential:                                             < 2mV

Tip-to-Ground Resistance:                                          < 2 ohms

Idle Temperature Stability:                                          ± 1.1°C (2°F) in still air

Hand-piece Cable Length:                                            L=178cm (70"), burn resistant, ESD safe

Hand-piece Connector:                                                 F connector

Workstand Dimensions w x dx h:                                8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:                                        7.4 lbs (3.35 kg)

Weight of the * workstand:                                          1.05 lbs (.476 kg)

MFR-5241

MFR 5241

PRODUCT DESCRIPTION

New Dual Port Simultaneous Soldering and Rework System with both the Advanced™ Hand-piece and the Precision Tweezers. Users get maximum application flexibility for soldering and reworking the widest range of surface mount components simultaneously.

FEATURES AND BENEFITS

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

  • Configured with two Metcal Advanced Soldering and Rework Hand-pieces.

  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.

  • Improved ergonomics with lightweight hand-pieces.

  • Greater process control with SmartHeat® Technology.

  • ESD safe with incoming AC ground monitoring circuitry.

  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.

  • Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.​

 

PRODUCT COMPRISES OF
 

MX-PS5200                                                        Power supply, 100 to 240 VAC input, dual switch port with LCD Display

MX-PTZ                                                              Tweezers Hand-piece with one cartridge removal pad

MX-H1-AV                                                          Metcal Advanced™ Hand-piece with one cartridge removal pad

MX-W4PT                                                           Workstand for Tweezers Hand-piece with one sponge and one brass pad

MX-W1AV                                                           Workstand for Metcal Advanced™ Hand-piece, Soldering and Rework with one sponge                                                                              and one brass pad

NOTE: No tip/cartridge included

TECHNICAL SPECIFICATIONS

Ambient Operating Temperature:                             10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:                           55°C (131°F)

Input Line Voltage:                                                       100- 240 VAC, grounded circuit

Input Line Frequency:                                                  50/60 Hz

Power Consumption:                                                   125 Watts

Output Power Maximum:                                            80 Watts max. Per channel at 22°C (when operated with two hand-pieces                                                                                                     dynamically, the 80 watts output power is is shared based on demand)

Output Frequency:                                                       13.56 MHzC

Power Cord 3-Wire:                                                      183cm (18/3") SJT

Dimensions w x d x h:                                                  12.1cm x 13.0cm x 23.5cm 
                                                                                         (4.8" x 5.1" x 9.3")

Certification / Marking:                                                 cTUVus, CE

Tip-to-Ground Potential:                                             < 2mV

Tip-to-Ground Resistance:                                          < 2 ohms

Idle Temperature Stability:                                          ± 1.1°C (2°F) in still air

Hand-piece Cable Length:                                            L=178cm (70"), burn resistant, ESD safe

Hand-piece Connector:                                                 F connector

Workstand Dimensions w x dx h:                                8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:                                        7.4 lbs (3.35 kg)

Weight of the * workstand:                                          1.05 lbs (.476 kg)

MFR-5250

MFR 5250

PRODUCT DESCRIPTION

New Dual Port Simultaneous Desoldering System designed for plated-through-hole component desoldering. The easy-to-grip handle allows the task to be completed quickly and comfortably. This "shop-air" hand tool, in combination with the new dual simultaneous power supply, provides unprecedented thermal performance on difficult ground planes and other high-mass applications.

FEATURES AND BENEFITS

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

  • Configured with the Metcal Desoldering Gun Hand-piece.

  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.

  • Improved ergonomics with lightweight hand-pieces.

  • Greater process control with SmartHeat® Technology.

  • ESD safe with incoming AC ground monitoring circuitry.

  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.

Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.

NOTE: Unit requires shop air for desoldering.​

PRODUCT COMPRISES OF
 

MX-PS5200                                                  Power supply, 100 to 240 VAC input, dual switch port with LCD Display

MX-DS1                                                        Desoldering Gun Hand-piece with one cartridge removal pad

MX-W5DS                                                     Workstand for Desoldering Gun Hand-piece with one sponge and one brass pad

AC-CB1                                                         Desolder Chamber Cleaning Brush

AC-CB2                                                         Tube Cleaning Brush

MX-DCF1                                                      Chamber Liner and Filter Pack

AC-TC                                                            Desolder Tip Cleaner

MX-RM8E                                                     Desoldering Cord

MX-DAH4                                                     ESD Air Hose with Fitting

NOTE: No tip/cartridge included

TECHNICAL SPECIFICATIONS

Ambient Operating Temperature:                             10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:                           55°C (131°F)

Input Line Voltage:                                                       100- 240 VAC, grounded circuit

Input Line Frequency:                                                  50/60 Hz

Power Consumption:                                                   125 Watts

Output Power Maximum:                                            80 Watts max. Per channel at 22°C (when operated with two hand-pieces                                                                                                     dynamically, the 80 watts output power is is shared based on demand)

Output Frequency:                                                       13.56 MHzC

Power Cord 3-Wire:                                                      183cm (18/3") SJT

Dimensions w x d x h:                                                  12.1cm x 13.0cm x 23.5cm 
                                                                                         (4.8" x 5.1" x 9.3")

Certification / Marking:                                                 cTUVus, CE

Tip-to-Ground Potential:                                             < 2mV

Tip-to-Ground Resistance:                                          < 2 ohms

Idle Temperature Stability:                                          ± 1.1°C (2°F) in still air

Hand-piece Cable Length:                                            L=178cm (70"), burn resistant, ESD safe

Hand-piece Connector:                                                 F connector

Workstand Dimensions w x dx h:                                8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:                                        7.4 lbs (3.35 kg)

Weight of the * workstand:                                          1.05 lbs (.476 kg)

MFR-5251

MFR 5251

PRODUCT DESCRIPTION

New Dual Port Simultaneous Soldering, Desoldering and Rework System. This configuration is ideal for mixed technology boards and provides the greatest versatility for addressing soldering and rework tasks simultaneously.

FEATURES AND BENEFITS

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.

  • Configured with the Metcal Desoldering Gun Hand-piece.

  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders.

  • Improved ergonomics with lightweight hand-pieces.

  • Greater process control with SmartHeat® Technology.

  • ESD safe with incoming AC ground monitoring circuitry.

  • Built-in power indication meter with digital display and bar graph that dynamically provides the operator with feedback on the status of the soldering operation.

Metcal TipSaver™ Workstand improves tip life with its “Auto-Sleep” function.

NOTE: Unit requires shop air for desoldering.

PRODUCT COMPRISES OF
 

MX-PS5200                                                  Power supply, 100 to 240 VAC input, dual switch port with LCD Display

MX-DS1                                                        Desoldering Gun Hand-piece with one cartridge removal pad

MX-W5DS                                                     Workstand for Desoldering Gun Hand-piece with one sponge and one brass pad

AC-CB1                                                         Desolder Chamber Cleaning Brush

AC-CB2                                                         Tube Cleaning Brush

MX-DCF1                                                      Chamber Liner and Filter Pack

AC-TC                                                            Desolder Tip Cleaner

MX-RM8E                                                     Desoldering Cord

MX-DAH4                                                     ESD Air Hose with Fitting

NOTE: No tip/cartridge included

TECHNICAL SPECIFICATIONS

Ambient Operating Temperature:                             10- 40°C (50°F - 104°F)

Maximum Enclosure Temperature:                           55°C (131°F)

Input Line Voltage:                                                       100- 240 VAC, grounded circuit

Input Line Frequency:                                                  50/60 Hz

Power Consumption:                                                   125 Watts

Output Power Maximum:                                            80 Watts max. Per channel at 22°C (when operated with two hand-pieces                                                                                                     dynamically, the 80 watts output power is is shared based on demand)

Output Frequency:                                                       13.56 MHzC

Power Cord 3-Wire:                                                      183cm (18/3") SJT

Dimensions w x d x h:                                                  12.1cm x 13.0cm x 23.5cm 
                                                                                         (4.8" x 5.1" x 9.3")

Certification / Marking:                                                 cTUVus, CE

Tip-to-Ground Potential:                                             < 2mV

Tip-to-Ground Resistance:                                          < 2 ohms

Idle Temperature Stability:                                          ± 1.1°C (2°F) in still air

Hand-piece Cable Length:                                            L=178cm (70"), burn resistant, ESD safe

Hand-piece Connector:                                                 F connector

Workstand Dimensions w x dx h:                                8.6cm x 19.1cm x 8.3cm (3.4" x 7.5" x 3.3")

Weight of the power supply:                                        7.4 lbs (3.35 kg)

Weight of the * workstand:                                          1.05 lbs (.476 kg)

MFR-500DS

500 DS

PRODUCT DESCRIPTION

Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon.

The system utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-regulating heater which ‘senses’ its own temperature and closely maintains its pre-set idle temperature for the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The MX-500 retains switchable dual port, 40W operation while introducing numerous new features in a new housing.

FEATURES AND BENEFITS

  • Integrated Power Indication Meter: a built in net power meter which will display a graphical and numerical representation of the power applied to the cartridge.

  • User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.

  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system. Only after the power line ground has been restored, can the MX-500 be restarted and soldering operations can be resumed.

  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.

  • Compatibility with all MX products: the MX-500 redesign allows full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces and accessories.

  • Greater process control with SmartHeat® Technology

  • Reduced space requirements

 

  • MX-500DS Soldering / Desoldering System includes:Power supply

  • MX-RM3E soldering and rework hand-piece with cartridge removal pad

  • WS1 sleeper workstand for the RM3E

  • MX-DS1 Desoldering Gun with cartridge removal pad

  • MX-W5DS Tip Saver workstand for the MX-DS1

  • MX-RM8E: Desoldering Cord

  • MX-DAH4: ESD Air Hose with Fitting

  • AC-CB1: Cleaning Brush

  • AC-CB2: Tube Cleaning Brush

  • MX-DCF1: Chamber Liner and Filter Pack

  • AC-TC: Desoldering Tip Cleaner

NOTES: 

  • Requires 60-100PSI of shop air 

  • No tip/cartridge included

MFR-500S

500 S

PRODUCT DESCRIPTION

Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon.

 

The system utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-regulating heater which ‘senses’ its own temperature and closely maintains its pre-set idle temperature for the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The MX-500 retains switchable dual port, 40W operation while introducing numerous new features in a new housing.

FEATURES AND BENEFITS

  • Integrated Power Indication Meter: a built-in net power meter which will display a graphical and numerical representation of the power applied to the cartridge.

  • User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.

  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system. Only after the power line ground has been restored, can the MX-500 be restarted and soldering operations can be resumed. 

  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.

  • Compatibility with all MX products: the MX-500 redesign allows full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces, and accessories.

  • Greater process control with SmartHeat® Technology

  • Reduced space requirements

  • MX-500S Soldering / Rework System includes:

  • Power supply

  • MX-RM3E soldering and rework hand-piece with cartridge removal pad

  • WS1 sleeper workstand

    NOTE: No tip/cartridge included

MFR-500SPT

500 SPT

PRODUCT DESCRIPTION

Metcal’s MX-500 Soldering and Rework System has been reimagined, adding features and a new look to a bench top icon.

 

The system utilizes SmartHeat® Technology, wherein each cartridge is equipped with a self-regulating heater which ‘senses’ its own temperature and closely maintains its pre-set idle temperature for the life of the heater-tip. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The MX-500 retains switchable dual port, 40W operation while introducing numerous new features in a new housing.

FEATURES AND BENEFITS

  • Integrated Power Indication Meter: a built in net power meter which will display a graphical and numerical representation of the power applied to the cartridge.

  • User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.

  • Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system. Only after the power line ground has been restored, can the MX-500 be restarted and soldering operations can be resumed.

  • Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.

  • Compatibility with all MX products: the MX-500 redesign allows full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces, and accessories.

  • Greater process control with SmartHeat® Technology

  • Reduced space requirements

    MX-500SPT Soldering / Tweezer Rework System includes:
        •    Power supply
        •    MX-RM3E soldering and rework hand-piece with cartridge removal pad
        •    WS1 sleeper workstand for MX-RM3E
        •    MX-PTZ Precision Tweezer hand-piece with cartridge removal pad

  • MX-W4PT Tip Saver workstand for MX-PTZ

 

NOTE: No tip/cartridge included

bottom of page